There are a lot of fun things people can do when at home, particularly easy craft. This includes making good things out of junk. Below are some steps on how to make paper beads out of junk materials. Tools needed include glue, scissors, pencil or pen, varnish, ruler, string, an assortment of papers, paper plate, and dowel or toothpick
Firstly, tear a paper from the magazine or newspaper. Cut it into strips beginning from top to bottom using a paper cutter or scissors. Triangular shapes are more appropriate. A template can give you guidance on how to cut the strips. The bead width should be the base of the triangle.
Second, place your dowel at the base of the triangle and roll it round itself, starting with the broadest end, until the glued point is wrapped around the dowel. Roll the strip evenly if you want to achieve proportion so that the pointed end is at the center. Use your finger to extend the glue on the bead. This ensures it is more stud, shiny and held together.
Thirdly, roll tightly the triangle onto the dowel. Make certain that the strip is rolled and stuck down before rolling it on your finger. To ensure that it is protected and cylindrical, put a little pressure on it. If it unravels, put on some more glue and hold it still until the glue is set. Several layers of glue can be applied so as to protect your work.
The next step is to apply varnish to the bead on dry the glue. This makes it water resistant. It is prudent to swivel them around the cocktail stick so as to prevent them from sticking when completely dry. Ensure the glue dries completely and ensure it does not attach to something else. A toothpick stuck into a pincushion or some foam can also be used to shove the excess glue. A longer-lasting and glossier finish can be achieved by adding several coats.
You can then remove the beads after a few hours. This is when your varnish has positioned on your bead. It can also be done by sliding the items out of a bamboo skewer or dowel. It will hold only if it is glued and wrapped fine. If you experience unraveling of the bead, add more glue.
Crafting more beads will complete the project. You can add some paint to bring out your designs and put some glitters on the blobs convey the sparkly form. Tie the beads in a string and not a thread. Make decorating patterns with the string along the outer surface of a paper. For geometric and spiral patterns, use a little wire to align the beads. A little glaze might be added using nail polish or paint for coating.
A keen follow on this procedure gives you fine results as the items are delicate at times. They can also be used to make earrings, necklaces, and bracelets. You can also decorate your house with them. This is considered a good way of conserving the environment.
Firstly, tear a paper from the magazine or newspaper. Cut it into strips beginning from top to bottom using a paper cutter or scissors. Triangular shapes are more appropriate. A template can give you guidance on how to cut the strips. The bead width should be the base of the triangle.
Second, place your dowel at the base of the triangle and roll it round itself, starting with the broadest end, until the glued point is wrapped around the dowel. Roll the strip evenly if you want to achieve proportion so that the pointed end is at the center. Use your finger to extend the glue on the bead. This ensures it is more stud, shiny and held together.
Thirdly, roll tightly the triangle onto the dowel. Make certain that the strip is rolled and stuck down before rolling it on your finger. To ensure that it is protected and cylindrical, put a little pressure on it. If it unravels, put on some more glue and hold it still until the glue is set. Several layers of glue can be applied so as to protect your work.
The next step is to apply varnish to the bead on dry the glue. This makes it water resistant. It is prudent to swivel them around the cocktail stick so as to prevent them from sticking when completely dry. Ensure the glue dries completely and ensure it does not attach to something else. A toothpick stuck into a pincushion or some foam can also be used to shove the excess glue. A longer-lasting and glossier finish can be achieved by adding several coats.
You can then remove the beads after a few hours. This is when your varnish has positioned on your bead. It can also be done by sliding the items out of a bamboo skewer or dowel. It will hold only if it is glued and wrapped fine. If you experience unraveling of the bead, add more glue.
Crafting more beads will complete the project. You can add some paint to bring out your designs and put some glitters on the blobs convey the sparkly form. Tie the beads in a string and not a thread. Make decorating patterns with the string along the outer surface of a paper. For geometric and spiral patterns, use a little wire to align the beads. A little glaze might be added using nail polish or paint for coating.
A keen follow on this procedure gives you fine results as the items are delicate at times. They can also be used to make earrings, necklaces, and bracelets. You can also decorate your house with them. This is considered a good way of conserving the environment.
About the Author:
Learn how to make paper beads by following the instructions we have provided online. The website that reveals the tips can be found at http://www.paperbeadgirl.com.
No comments:
Post a Comment