One of the most artistic techniques that is used for creative image design and inscription of symbols is glass carving. It has been in use for centuries. One particular technique used with it is sand-carving that was first utilized in the late 19th century. It was, and is still being used for creating multilevel abrasive etchings. Once the required designs have been etched into the glasses, light and shadow details are added. In consideration of glass carving Alberta offers one of the best options.
For people that are looking to carve glasses, there are 3 main components that they will require. These are an acid based cream for etching, foam brush and stencils. The first step is to place the pieces to be used on a flat surface after which they are sprayed with a cleaner. It is very essential that the cream used for etching adheres properly to the surface. This explains why the surfaces used have to be not only clean but also dry.
After being cleaned, the surface is wiped with soft cloth so that it dries up before one continues. One has to choose the design that should be carved. Most experts in art and craft recommend stencil since it has an already existing design. There are stencils that come with adhesive backing to make them adhere completely to the piece. The back is pulled off the stencil as it is held down firmly for some seconds.
For purposes of safety, one should wear goggles and latex gloves during the exercise. There are very strong fumes that are produced from the cream which have diverse effects on different people. People with sensitive eyes especially would have to wear goggles, lest their eyes be affected further. People that are allergic to latex should use rubber gloves or vinyl.
There should be application of latex towards the edges of the stencil, especially so at the places where they meet glass. This is used for protecting sections that are intended to get carved. If such sections were to be left uncovered and they come into contact with the cream, chances are that the design will be ruined. After the cream is placed on the foam brush, the brush is used to even out the application. Watching the corners and edges ensures that all sections are covered by the cream.
There is removal of the cream from the glass after every 10-20 minutes that have passed for every direction it came with. Excess creams are wiped out using paper towels and the hands properly washed prior to taking off the gloves. Proper hand washing ensures no traces of the chemicals are left.
There are many persons that have appreciation for carved glass. Most of the carvings can be seen in shops selling gifts and in fancy windows. There are not so many people that deal in these carvings, which is why it is a business that has potential to be highly profitable.
For those that are looking to take up glass carving Alberta offers one of the best environments. Starting the business would need 3 main things, namely, resists, a blast cabinet and a studio that is well lit. The right marketing strategies will ensure the business picks up fast.
For people that are looking to carve glasses, there are 3 main components that they will require. These are an acid based cream for etching, foam brush and stencils. The first step is to place the pieces to be used on a flat surface after which they are sprayed with a cleaner. It is very essential that the cream used for etching adheres properly to the surface. This explains why the surfaces used have to be not only clean but also dry.
After being cleaned, the surface is wiped with soft cloth so that it dries up before one continues. One has to choose the design that should be carved. Most experts in art and craft recommend stencil since it has an already existing design. There are stencils that come with adhesive backing to make them adhere completely to the piece. The back is pulled off the stencil as it is held down firmly for some seconds.
For purposes of safety, one should wear goggles and latex gloves during the exercise. There are very strong fumes that are produced from the cream which have diverse effects on different people. People with sensitive eyes especially would have to wear goggles, lest their eyes be affected further. People that are allergic to latex should use rubber gloves or vinyl.
There should be application of latex towards the edges of the stencil, especially so at the places where they meet glass. This is used for protecting sections that are intended to get carved. If such sections were to be left uncovered and they come into contact with the cream, chances are that the design will be ruined. After the cream is placed on the foam brush, the brush is used to even out the application. Watching the corners and edges ensures that all sections are covered by the cream.
There is removal of the cream from the glass after every 10-20 minutes that have passed for every direction it came with. Excess creams are wiped out using paper towels and the hands properly washed prior to taking off the gloves. Proper hand washing ensures no traces of the chemicals are left.
There are many persons that have appreciation for carved glass. Most of the carvings can be seen in shops selling gifts and in fancy windows. There are not so many people that deal in these carvings, which is why it is a business that has potential to be highly profitable.
For those that are looking to take up glass carving Alberta offers one of the best environments. Starting the business would need 3 main things, namely, resists, a blast cabinet and a studio that is well lit. The right marketing strategies will ensure the business picks up fast.
About the Author:
In order to become better informed about the process of glass carving Alberta residents should first review the details here at www.claudegarneaustudio.ca. To learn more, simply check out this homepage on http://www.claudegarneaustudio.ca.
No comments:
Post a Comment